Planes at the airshow

There were more…there were so many more!

And here are the shots using the SPII and Tri-X:

Part 1 can be found here.  Still haven’t rescanned…

People at the airshow

The Axis Trio strikes back hard!  Seeing all the Allied warbirds was too much for them.  Although it was a perfect day to try out the Ferrania P30 Alpha film for the first time, I underexposed the film by at least a stop (and did in my Spotmatic too, shooting Tri-X).  Thankfully, it wasn’t a big deal:

Even though underexposed, there was plenty of detail, which I am extremely happy about!  The shots were completely usable, though like I said in my previous post, bumping up the contrast so much did start revealing lots of dust and scratches, water spots, etc, and I didn’t have the same problem with the Tri-X (see below). I will say that my local camera store isn’t one of the labs that Ferrania recommends.

Here is all that shooting info again:
Scanned myself with the Pakon F335, edited in Photoshop
D-76 stock at 8min (I think, or it could have been 9min…it was developed by my local camera store)
Canon 7 with the Leitz 35mm f/3.5 Summaron
Very overcast day
Shutter speeds were nominally around 1/125 at f/8 (I was shooting at around ASA100)

Tri-X definitely has a different look to it, slightly more consistent when underexposed I’d say (the middle shot was overexposed by a stop I think).

Alright, here’s the thing with the P30: It’s so fine-grained that I expected it to be much sharper than this, and it looks soft as butter.  I’m not completely convinced it wasn’t my lens, but comparing it to other shots on Double-X those look much sharper.  Here’s a 100% crop from my scan:

So the other possibility is that P30 is sufficiently thicker (or thinner?) than regular film to be out of focus in my Pakon, so I will have to rescan both negatives making sure I refocus using some P30 film.  Then I will have to refocus again with something like Tri-X, for everything else I scan.  It’s on the agenda, but I haven’t quite found time yet.

This is one of the best exposed shots I had.  And here’s the other one from the last post:

And one last one, this is an extreme example of burning in the sky, just to see what was possible:

.

Don’t ever trust the meter…

Don’t ever trust, don’t ever trust the meter, it lies!
Don’t ever trust, don’t ever trust the meter, 
When it cries, cries your name…

I’m paraphrasing Queensryche here.  But the point is, that even I’m still making exposure mistakes on occasion, and evidently it had to do with it being a particularly overcast day (a rare occurrence in Colorado Springs, I can tell you).  Evidently everything I shot during the Pike’s Peak Regional Airshow was underexposed by a stop or so.  Not the end of the world, thankfully, as Ferrania P30 seems to just lose contrast when it’s underexposed.  At least, under the circumstances where it’s an overcast day, and using a 1940s lens.  Here’s the worst offender:

 

That was at least 2 stops underexposed.  Even though underexposed, I was able to pull incredible amounts of detail in scanning, it was just a matter of bumping up the contrast and usually lightening things up a bit.  What I couldn’t say is what’s up with all the dust particles and water spots (and I always run my film through the StaticVac right before scanning).  I had a roll of Tri-X developed at the same time and there was nothing wrong with that roll at all; I think I will make an entire post out of unfairly comparing the two films.

Here are all the stats for this:
Scanned myself with the Pakon F335, edited in Photoshop
D-76 stock at 8min (I think, or it could have been 9min…it was developed by my local camera store)
Canon 7 with the Leitz 35mm f/3.5 Summaron
Overcast day
Shutter speeds were nominally around 1/125 at f/8 (I was shooting at around ASA100)

The Axis Trio makes its first appearance, here’s a pic:

(Shot with the Spotmatic SPII on Tri-X) – Japanese camera body, German lens, and finally, Italian film!

As far as first impressions go, I wasn’t expecting much at all because John at Cameraworks said they were very underexposed and the negatives were quite thin.  I don’t know how to describe what I mean, but looking at the curve I provided, the picture was there right in the middle, where with something like Tri-X all that information would have been way to one side where it’s much less usable, and usually is a lot grainier.  And this film certainly has some fine grain!

I shot that 35mm Summaron at f/8 all day and it looks incredibly soft, compared to my beloved Takumars (this is really the first time I’ve put it through its paces), which threw me for a while.  Having had a couple weeks to think it over and studying the rest of my scans, I think I might be dealing with a focus error here.  Is P30 a different thickness from most other films?  I’m going to rescan all the negatives when I have a chance, and make sure I run the autofocus wizard using this particular film.  I assume that I will also have to run it again to refocus it to all the other films I use.  Again, nothing wrong with that roll of Tri-X I scanned at the same time.

I’m hoping that the dust/water spots were just so noticeable because of the underexposure.

October updates

I can’t sleep right now, so I’ll post this early.  For those of you that actually read this blog, thanks for sticking it out so far.  Summer season has finally wound down (a bit at least) and there will probably be more posts with actual content.  Here’s what’s been happening in my photographic world:

I sent my Pentax SPII off for a CLA, it seemed to be about time since one of the strap lugs had come loose.  For future reference, Cameraworks charges $120 for a full CLA, which is fine, and at least I’m not shipping the camera anywhere (I did once send my Pentax ESII off to be repaired a few years ago by this guy but he wasn’t able to get the speeds right unfortunately).  This will be the first time one of my cameras will have had a CLA.

I’ve had my Pakon F335 in storage for more than a year, but that’s about to change and I should be back to scanning my own images shortly (the only thing I scanned myself recently is this post, the rest of my images were scanned on Cameraworks’ F235 or Mike’s Camera’s Frontier).

I shot my first two rolls of Ferrania P30 alpha, happy to use the Axis Trio as I’ve dubbed it, for the first time: Japanese camera body, German lens, and Italian film, looking forward to seeing my results and scanning them on the Pakon.  If it’s anything like Double-X (and from everything I’ve read it is), it’s a good film for older, low-contrast lenses and should give a very classic mid-century feel.  Thankfully, I also shot on a pretty overcast day (rare in Colorado).

Back to sleep now…